Some of the most common questions asked by our customers for your quick reference.

General Questions

We have a vast network of stockists/resellers across Australia. Find a reseller near you – Where to buy.

Alternatively, you can call us on 1300 366 362 and we will be able to help you.

No. We have a vast network of stockists/resellers across Australia. Find a reseller near you – Where to buy.

Alternatively, you can call us on 1300 366 362 and we will be able to help you.

Yes and it is a free service! Simply email us your plans and engineers details to info@unipier.com.au and we will calculate for you. We will even contact your Structural Engineer or Builder or both if need be.

You will then be able to present this information to one of our national stockists/resellers who will be able to provide you with a quotation.

Uni-Pier products are Batch Hot Dipped Galvanised from 390-600g/m2 per side which ensures that they provide maximum protection within extreme marine environments.

No other product can claim this and is the reason why Uni-Pier are so popular along the coast.

For added protection, we also recommend coating Uni-Pier with an approved paint system.

Technical Questions

Uni-Pier Australia are so confident with their products that we now offer a 25 Year Warranty. Australian Made with Australian Steel backed by a comprehensive 25 year Warranty. Please refer to our 25 Year Warranty for all relevant information which is endorsed also by the GAA (Galvaniser’s Association of Australia)

You have two options or a combination of both.

1. Use a minimum of (6) six metal Tek Screws. For larger loads use more screws.
2. Use (2) two x 12mm Hot Dip Galvanised bolts.

You can also combine both to use (2) two x 12mm Hot Dip Galvanised bolts plus (2) two metal Tek Screws.

If unsure please contact us on 1300 366 262

Yes. However our 100 x 100 x 3mm or 4mm posts allows the head assembly to slide inside the post, allowing for a sleek appearance. The head assembly for the 89 x 89 post fits on the outside of the post.

Yes. We will work with you to develop the best post, baseplate and head assembly combination.

Please Note : Special Order items generally require more time for delivery.

Yes. Call us on 1300 366 362. One of our technical team will assist you with your project.

Bracing is determined on your job specifications. Essentially, bracing is required when the height from the top of the concrete to the underside of the bearer is 400mm or greater.

We recommend you send us your architectural and structural engineer drawings and we will assess the best sub-floor system for your project.

Call us on 1300 366 362. One of our technical team will assist you.

Product Support

We’re here to help if you need information or advice